HP ProLiant ML310 User Manual

Figure 3 HP Storage Server Management console
Using the Remote desktop method
Remote Desktop provides the ability for you to log onto and remotely administer your server, giving you a
method of managing it from any client. Installed for remote administration, Remote Desktop allows only
two concurrent sessions. Leaving a session running takes up one license and can affect other users. If
two sessions are running, additional users will be denied access.
To connect the storage server to a network using the remote desktop method
1. On the PC client, select Star t > Run.AtOpen,typemstsc,thenclickOK.
2. Enter the serial number of the storage server followed by a hyphen (-) in the Computer box and
click Connec t. F or example: D4059ABC3433-.
NOTE:
If you are able to determine the IP address from your DHCP server, you can substitute the IP
address for the serial numb er and hyphen (-). For example: 192.100.0.1.
3. Log in to the H P ProLiant Storage Server with the default user name administrator and the
password hpinvent.
The HP ProLiant Data Protection Storage Server Management console and Rapid Startup Wizard
will start automatically.
NOTE:
You can change the administrator name and password when you configure the server
using the "Rapid Startup Wizard"onpage26.
4. To complete net work configuration using the Rapid Startup Wizard, see "Configuring the server on
the network"onpage25.
22
Installing and configuring the server

HP ProLiant ML310 Specifications

General

Brand	HP
Model	ProLiant ML310
Category	Server
Language	English