HP ProLiant ML310 User Manual

1. Access Disk Management.
2. Select the volume or logical drive, then right-click on it.
3. Select Properties.
4. Select the Shadow Copies tab.
5. Selectthevolumethatyouwanttoredirectshadowcopiesfromandensurethatshadowcopiesare
disabled on that volume; if enabled, click Disable.
6. Click Settings.
7. In the Located on this volume field, select an available alternate volume from the list.
NOTE:
To change the default shado w copy schedule settings, click Schedule.
8. Click OK.
9. On the Shadow Copies tab, ensure that the volume is selected, and then click Enable.
Shadow copies are now scheduled to be made on the alternate volume.
Disabling shadow copies
When shadow copies are disabled on a volume, all existing shadow copies on the volume are deleted as
well as the schedule for making new shad ow copies.
CAUTION:
When the Shadow Copies Service is di sabled, all shadow copies on the selected volumes are deleted.
Once deleted, shadow copies cannot be restored.
Managing
shadow copies from the storage server desktop
The stora g e server desktop can be accessed by using Remote Desktop to manage shadow copies.
To access shadow copies from the storage server desktop:
1. Access the storage ser ver desktop from the primary navigation bar by selecting Maintenance >
Remote Desktop.
2. Click My
Computer.
3. Right-click the volume name, and select Properties.
4. Click the Shadow C opie s tab. See Figure 11.
HP ProLiant ML310 Storage Server
51

HP ProLiant ML310 Specifications

General

Brand	HP
Model	ProLiant ML310
Category	Server
Language	English