l Rate limit for multicast packets: 25200 pps
Procedure
Step 1 Enter the interface view.
<Huawei> system-view
[Huawei] sysname RouterA
[RouterA] interface ethernet 2/0/0
Step 2 Set the rate limit in pps for broadcast packets.
[RouterA-Ethernet2/0/0] broadcast-suppression packets 12600
Step 3 Set the rate limit in pps for multicast packets.
[RouterA-Ethernet2/0/0] multicast-suppression packets 25200
Step 4 Set the rate limit in pps for unknown unicast packets.
[RouterA-Ethernet2/0/0] unicast-suppression packets 12600
Step 5 Verify the configuration.
Run the display flow-suppression interface command, and you can view the traffic suppression
configuration on Ethernet 2/0/0.
[RouterA] display flow-suppression interface Ethernet 2/0/0
storm type rate mode set rate value
-------------------------------------------------------------------------------
unknown-unicast pps pps: 12600(packet/s)
multicast pps pps: 25200(packet/s)
broadcast pps pps: 12600(packet/s)
-------------------------------------------------------------------------------
----End
Configuration Files
#
sysname RouterA
#
interface Ethernet 2/0/0
unicast-suppression packets 12600
multicast-suppression packets 25200
broadcast-suppression packets 12600
#
return
Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security 4 Traffic Suppression Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
96
To Next Page
Loading...
Need help?
General
