Huawei AR1200-S User Manual

14.4.5 Checking the Configuration
After configuring defense against flood attacks, you can view statistics about defense against
flood attacks on the interface board.
Prerequisites
The configurations of the flood attack defense are complete.
Procedure
Step 1 Run the display anti-attck statistics [ tcp-syn | udp-flood | icmp-flood ] command to check
the statistics of defense against flood attacks on the interface board.
----End
Example
After the configuration is complete, run the display anti-attck statistics [ tcp-syn | udp-
flood | icmp-flood ] command to check the statistics of defense against flood attacks on the
interface board.
<Huawei> display anti-attck statistics tcp-syn
Packets Statistic Information:
-------------------------------------------------------------------------------
AntiAtkType TotalPacketNum DropPacketNum PassPacketNum
(H) (L) (H) (L) (H) (L)
-------------------------------------------------------------------------------
Tcp-syn 0 0 0 0 0 0
-------------------------------------------------------------------------------
<Huawei> display anti-attack statistics udp-flood
Packets Statistic Information:
-------------------------------------------------------------------------------
AntiAtkType TotalPacketNum DropPacketNum PassPacketNum
(H) (L) (H) (L) (H) (L)
-------------------------------------------------------------------------------
Udp-flood 0 0 0 0 0 0
-------------------------------------------------------------------------------
<Huawei>display anti-attack statistics icmp-flood
Packets Statistic Information:
-------------------------------------------------------------------------------
AntiAtkType TotalPacketNum DropPacketNum PassPacketNum
(H) (L) (H) (L) (H) (L)
-------------------------------------------------------------------------------
Icmp-flood 0 0 0 0 0 0
-------------------------------------------------------------------------------
14.5 Configuring Application Layer Association
Application layer association controls forwarding and discarding of protocol packets by enabling
or disabling application layer protocols. In this manner, application layer association can defense
attacks.
14.5.1 Establishing the Configuration Task
This section describes the applicable environment, required tasks, and data for configuring
application layer association.
Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security
14 Configuration of Attack Defense and Application Layer
Association
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
289

Huawei AR1200-S Specifications

General

Brand	Huawei
Model	AR1200-S
Category	Network Router
Language	English