Huawei AR1200-S User Manual

NOTE
Send-time for a key-id is configured according to the timing mode defined for the keychain.
Only one send key-id in a keychain can be active at a time. The send-time of different key-ids
in a keychain must not overlap each other.
To re-configure send-time, we need to undo the send-time that is currently configured.
----End
13.3.9 Configuring receive-time of a key-id
Procedure
l Absolute Timing Mode
1. Run:
system-view
The system view is entered.
2. Run:
keychain keychain-name mode absolute
The keychain is created in absolute timing mode and keychain view is entered.
3. Run:
key-id key-id
The key-id is created and key-id view is entered.
4. Run:
receive-time utc start-time start-date { duration { duration-value |
infinite } | { to end-time end-date }
The receive-time for the key-id is configured.
l Daily Periodic Timing Mode
1. Run:
system-view
The system view is entered.
2. Run:
keychain keychain-name mode periodic daily
The keychain is created in daily periodic timing mode and keychain view is entered.
3. Run:
key-id key-id
The key-id is created and key-id view is entered.
4. Run:
receive-time daily start-time to end-time
The receive-time for the key-id is configured.
l Weekly Periodic Timing Mode
1. Run:
system-view
The system view is entered.
Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security 13 Keychain Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
271

Huawei AR1200-S Specifications

General

Brand	Huawei
Model	AR1200-S
Category	Network Router
Language	English