Huawei FusionModule5000 Maintenance Guide

FusionModule5000 Smart Modular Data Center
Maintenance Guide (ECC800)
5 Parts Replacement
Issue 01 (2019-03-05)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
185
Figure 5-85 Adjusting the gap
----End
5.5.22 Replacing a Button
Context

The light button and exit button (green) can be reset automatically. Their BOM numbers
are both 16050101.

The emergency button (red) needs to be manually reset. Its BOM number is 16050102.

The exit button, emergency button, and light button are replaced in the same manner.
Procedure
Step 1 Remove the post side panel.
Step 2 Remove the buckle from the button installation position.
Step 3 Secure the button to the post using the delivered nut.
Step 4 Route the button cable out of the cable hole in the upper part of the post and then into the
upper frame mounting kit of the end door. Then reinstall the post side panel.

Huawei FusionModule5000 Specifications

General

Brand	Huawei
Model	FusionModule5000
Category	Wireless Router
Language	English