Huawei FusionModule5000 Maintenance Guide

FusionModule5000 Smart Modular Data Center
Maintenance Guide (ECC800)
2 Routine Maintenance
Issue 01 (2019-03-05)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
41
Maintenance
Item
Maintenance
Period
Operation
Standard
Troubleshooti
ng
abnormal. If
the RUN
indicator
blinks
slowly, the
access
actuator is
running
normally. If
the RUN
indicator
blinks at
short
intervals, the
communicat
ion is
interrupted.

The ALM
indicator is
off.
gateway is
not
energized. If
so,
reconnect
the cable. If
not, replace
the access
actuator.

If the RUN
indicator
blinks at
short
intervals,
check
whether the
communicat
ions cable is
properly
connected.
If not,
reconnect
the cable. If
so, replace
the cable.

If the ALM
indicator is
steady on,
clear the
alarm by
referring to
ECC800
Alarm
Reference
V100R001.
Check the
availability of
the access
actuator.
Semi-annually
On the WebUI
of the ECC800,
choose
Monitoring >
Aisle > Access
Actuator
Group >
Access
Actuator to
enter the
Controls page,
and remotely
control the
doors.
The smart
module aisle
doors can be
normally
controlled
through the
access actuator.
If the smart
module aisle
doors cannot be
normally
controlled,
check whether
the magnetic
lock cable is
loose or
disconnected. If
so, reconnect
the cable. If not,
replace the
access actuator
or magnetic

Huawei FusionModule5000 Specifications

General

Brand	Huawei
Model	FusionModule5000
Category	Wireless Router
Language	English