Humminbird ONIX Opeartion Manual

190
NAVIGATION IN SONAR VIEWS (2D, SI, DI)
T
o mark waypoints and start navigation, the control head must have a GPS fix from a connected or internal GPS receiver. The
n
avigation menus can be accessed from the X-Press Menu, touch screen, and the keypad.
Mark a Waypoint
You can mark a waypoint on the Sonar Views using the keypad or touch screen (Cross Touch models only). You can also mark a
waypoint at the vessel position or the cursor position.
Mark a Waypoint at the Vessel Position
Mark a Waypoint at the Cursor Position
Touch Screen
1. Press and hold a position on the Sonar View.
2. Select Waypoint.
Keypad
1. Use the Joystick to move the cursor to a position on
the Sonar View.
2. Press the MARK key twice.
Touch Screen
1. Tap Sonar in the status bar.
2. Select Mark.
3. Select Waypoint.
Keypad
1. Press the MARK key twice.
Sonar & Navigation

Humminbird ONIX Specifications

General

Brand	Humminbird
Model	ONIX
Category	GPS
Language	English