EasyManuals Logo

Husqvarna FE 450 2018 User Manual

Husqvarna FE 450 2018
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #128 background imageLoading...
Page #128 background image
17 TUNING THE ENGINE
126
H02263-10
Danger
Danger of poisoningExhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
Always make sure there is sufficient ventilation
when running the engine.
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
Allow the vehicle to idle.
The malfunction indicator lamp stops flashing once
teaching is completed.
Info
If the engine becomes too hot, perform a cool-down
ride at medium revs.
Then do not switch off the engine after this, but leave
it running at idle speed until teaching is completed.
17.6 Checking the basic position of the shift lever
Info
When driving, the shift lever must not touch the driver's boot when in the basic position.
When the shift lever keeps touching the boot, the transmission will be subject to an excessive load.
400692-10
Sit on the vehicle in the riding position and determine the
distance
A
between the upper edge of your boot and the
shift lever.
Gap between the shift
lever and the top of the
boot
10 20 mm (0.39
0.79 in)
» If the distance does not meet the specifications:
Adjust the basic position of the shift lever.
( p. 126)
17.7 Adjusting the basic position of the shift lever
401950-12
Remove screw
1
with the washers and take off shift
lever
2
.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna FE 450 2018 and is the answer not in the manual?

Husqvarna FE 450 2018 Specifications

General IconGeneral
BrandHusqvarna
ModelFE 450 2018
CategoryMotorcycle
LanguageEnglish

Related product manuals