12 SERVICE WORK ON THE CHASSIS
64
12.15 Installing front fender
F00283-10
Main work
–
Position front fender. Mount and tighten screws
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
–
Mount and tighten screws
2
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
Finishing work
– Install the headlight mask with the headlight. ( p. 113)
– Check the headlight setting. ( p. 116)
12.16 Removing the shock absorber
Preparatory work
– Raise the motorcycle with a lift stand. ( p. 55)
E00939-10
Main work
– Remove the cable ties.
–
Remove screws
1
.
–
Remove screws
2
with the washers.
– Remove the frame protectors on the left and right.
F00284-10
–
Remove screw
3
.
–
Remove fitting
4
.
Info
Raise the wheel slightly to be able to remove the
screws more easily.
To Next Page
Loading...
Need help?
General
