EasyManuals Logo

Husqvarna FE 450 2018 User Manual

Husqvarna FE 450 2018
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #131 background imageLoading...
Page #131 background image
18 SERVICE WORK ON THE ENGINE
129
Danger
Danger of poisoningExhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
Always make sure there is sufficient ventilation
when running the engine.
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
Start the engine and check the response.
18.2 Checking the engine oil level
Preparatory work
Stand the motorcycle upright on a horizontal surface.
F00438-10
Condition
The engine is cold.
Check the engine oil level.
The engine oil reaches the lower edge of level
viewer
A
.
» If the engine oil does not reach the lower edge of the
level viewer:
Add engine oil. ( p. 132)
Condition
The engine is at operating temperature.
Check the engine oil level.
Info
After switching off the engine, wait one minute
before checking the level.
The engine oil is at a level between lower edge
A
and middle
B
of the level viewer.
» If the engine oil is not at a level between lower
edge
A
and middle
B
of the level viewer:
Add engine oil. ( p. 132)
18.3 Changing the engine oil and oil filter, cleaning the oil screens
Warning
Danger of scaldingEngine and gear oil get very hot when the motorcycle is ridden.
Wear suitable protective clothing and safety gloves.
In the event of scalding, rinse the area affected immediately with lukewarm water.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna FE 450 2018 and is the answer not in the manual?

Husqvarna FE 450 2018 Specifications

General IconGeneral
BrandHusqvarna
ModelFE 450 2018
CategoryMotorcycle
LanguageEnglish

Related product manuals