Husqvarna FE 450 2018 User Manual

12 SERVICE WORK ON THE CHASSIS
59
K00602-10
Main work
– Open the cable holder in front of the right radiator and detach
the wiring harness.
–
Remove screws
1
and hang the voltage regulator to the
side.
– Open the cable holder in front of the left radiator and detach
the wiring harness.
S02074-10
–
Remove screw
2
.
–
Remove screw
3
.
– Take off the upper triple clamp with the handlebar and set it
aside.
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
F00278-10
–
Remove O-ring
4
and protective ring
5
.
– Take off the lower triple clamp with the steering stem.
– Remove the upper steering head bearing.
12.10 Installing the lower triple clamp
0
0
11
0
0
22
0
0
33
B01632-10
Main work
– Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease ( p. 153)
– Position the lower triple clamp with the steering stem. Mount
the upper steering head bearing.
–
Check whether upper steering head seal
1
is correctly posi-
tioned.
–
Mount protective ring
2
and O-ring
3
.

Husqvarna FE 450 2018 Specifications

General

Brand	Husqvarna
Model	FE 450 2018
Category	Motorcycle
Language	English