Husqvarna TX 125 User Manual

23 SUBSTANCES
151
Recommended supplier
Bel‑Ray
®
– Si‑7 Synthetic 2T
Fork oil (SAE 4) (48601166S1)
Standard/classification
– SAE ( p. 153) (SAE 4)
Guideline
– Use only oils that comply with the specified standards (see specifications on the container) and that exhibit
the corresponding properties.
Shock absorber fluid (SAE 2.5) (50180751S1)
Standard/classification
– SAE ( p. 153) (SAE 2.5)
Guideline
– Use only oils that comply with the specified standards (see specifications on the container) and that exhibit
the corresponding properties.
Super unleaded (ROZ 95/RON 95/PON 91)
Standard/classification
– DIN EN 228 (ROZ 95/RON 95/PON 91)
Guideline
– Only use unleaded super fuel that matches or is equivalent to the specified fuel grade.
– Fuel with an ethanol content of up to 10 % (E10 fuel) is safe to use.
Info
Do not use fuel containing methanol (e. g. M15, M85, M100) or more than 10 % ethanol (e. g. E15,
E25, E85, E100).
Super unleaded (95 octane) mixed with 2-stroke engine oil (1:60)
Standard/classification
– DIN EN 228
– JASO FD ( p. 153) (1:60)
Mixture ratio
1:60 Engine oil, 2-stroke ( p. 150)
Super unleaded (ROZ 95/RON 95/PON 91) ( p. 151)
Recommended supplier
Bel‑Ray
®
– Si‑7 Synthetic 2T

Husqvarna TX 125 Specifications

General

Displacement	124.8 cc
Bore x Stroke	54 mm x 54.5 mm
Starter	Kickstarter
Transmission	6-speed
Seat Height	960 mm
Ground Clearance	370 mm
Engine Type	Single cylinder, 2-stroke
Rear Suspension	WP XACT shock absorber with linkage
Front Brake	260 mm disc
Rear Brake	220 mm disc
Clutch	Wet, multi-disc clutch, hydraulically operated