Hypertherm ArcGlide THC User Manual

ArcGlide THC Instruction Manual 806450 47
1 – Specifications
Table 3 – Recommended Advantech Ethernet switches
Table 4 lists the operating specifications for the recommended Ethernet switches. See the respective Advantech user
manuals for information about installing and operating these switches.
If your cutting machine does not include one of these Advantech Ethernet switches, use the specifications in Table 4 to
select an industrial-grade Ethernet switch that will support your plasma cutting machine.
Table 4 – Advantech Ethernet switch specifications
5 Ports 8 Ports 16 Ports
Hypertherm part number 005657 005655 005656
Advantech part number EKI-2525I-AE EKI-7629C-AE EKI-7626C-AE
Width × height × depth 37 mm X 140 mm X 95 mm
(1.46 inch X 5.51 inch X
3.74 inch)
79 mm X 152 mm X
105 mm
(3.11 inch X 5.98 inch X
4.13 inch)
79 mm X 152 mm X
105 mm
(3.11 inch X 5.98 inch X
4.13 inch)
Maximum power
consumption
5 W 6.5 W 6.5 W
Power input (not included) 12 – 48 VDC redundant dual inputs with twisted pair cable.
Ethernet connections Shielded RJ-45 ports
Electrical protection 4000 VDC Ethernet ESD protection, 3000 VDC surge (EFT) protection for
the power line
I/O transmission distance Up to 100 m (109 yard) (4-wire Cat5e or Cat6)
I/O transmission speed 10/100 Mbps auto-negotiation
Operating temperature -10ºC to 60ºC (14ºF to 140ºF)

Hypertherm ArcGlide THC Specifications

General

Brand	Hypertherm
Model	ArcGlide THC
Category	Control Systems
Language	English