Warranty
SC-12 810770 Operator Manual Echion
Waterjet product warranty
Hypertherm’s warranty does not extend to defects, failures, damages, deficiencies, or errors that
are:
not reported to Hypertherm within the warranty period; or
the result of modification, abuse, misuse, noncompliance with the installation or operation
instructions, unauthorized repair, inadequate maintenance, neglect, accident, or the use of
unapproved parts; or
the result of normal wear; or
the result of the system being operated contrary to Hypertherm’s instructions or stated limits
of rated and normal use.
For information about the manufacturer’s warranty, refer to the conditions of sale provided when the
product was purchased.
Consumable parts are not included in this warranty. Consumable parts include high-pressure water
seals, check valves, cylinders, bleed-down valves, low-pressure seals, high-pressure tubing, and
filters.
All third-party motors, pumps, and plumbing accessories are warrantied by the respective
manufacturers and are not included in this warranty.
Disclaimer
All product information contained in this manual is believed to be reliable as of the date of
publication. The manual could contain technical inaccuracies or typographical errors and can be
changed or updated without notice.
Product Warranty coverage up to
Echion™ pump
HyPrecision™ pump
27 months from the ship date,
or 24 months from the date of proven installation,
or 4,000 hours of operation, whichever occurs first
PowerDredge™ abrasive removal system
EcoSift™ abrasive recycling system
Reverse osmosis system
Bulk abrasive pot
Abrasive regulator
On/off valve air actuator
15 months from the ship date,
or 12 months from the date of proven installation,
whichever occurs first
Diamond orifice
600 hours of operation with the use of a thimble filter
and compliance with Hypertherm’s water quality
requirements