Hypertherm Echion User Manual

Touchscreen maps
9
Echion Operator Manual 810770 177
Primary operation screen
Refer to Operator interface on page 39 for more information about these screens.
Pierce-pressure mode Cut-pressure mode The intensifier is disabled.
Refer to Intensifier Control on page 170.
Modbus mode is enabled.
Refer to Remote Configuration on
page 167.
Push the Controls button
on the operator panel to turn on the pump.
Refer to Alarms on page 114.
Touch the Start symbol to
turn on the pump.
Go to page 179.

Hypertherm Echion Specifications

General

Brand	Hypertherm
Model	Echion
Category	Water Pump
Language	English