Installation
Echion Operator Manual 810770 153
Install the pump-mounted plumbing kit (optional)
The plumbing kit makes installing high-pressure tubing from the pump to the cutting table easier.
The reducing adapter for this kit changes the 3/8-inch high-pressure connection
to1/4 inch.
Refer to Fittings on page 144 for torque values and information about how to correctly install
high-pressure water fittings.
Parts, tools, and materials
1-18695 Pump-mounted plumbing kit
Two 1/16-inch open-ended wrenches
5/8-inch open-ended wrench
1-1/16-inch open-ended wrench
13/16-inch open-ended wrench
5/8-inch crowfoot wrench
13/16-inch crowfoot wrench
Torque wrench
High-pressure antiseize lubricant such as Blue Goop or PURE Goop
1
Tubing bracket
2
L-shaped tubing
3
Reducing adapter, 3/8-inch to 1/4-inch
4
Clamp
To Next Page
Loading...
Need help?
General
