Echion Operator Manual 810770 35
Optional equipment
Boost pump
The pump will not operate satisfactorily if the supply water pressure is too low for the pump to get to
stable pressure. A boost pump increases the water pressure to a value higher than the minimum
requirement.
Modbus TCP/IP communication
All Hypertherm waterjet pumps can use Ethernet to communicate with a CNC.
Utility connection panel kit
The utility connections for the Echion pump are inside the pump, at the point of use. With this kit,
utility connections are made on the outside of the pump.
Metric conversion kit
This kit includes adapter fittings for use in countries where metric connections are standard.
Pump-mounted high-pressure plumbing kit
This kit includes a bracket and a high-pressure tube to connect a high-pressure line directly to the
pump.
For part numbers, refer to Optional equipment kits on page 103.
To Next Page
Loading...
Need help?
General
