Preventive maintenance
54 810770 Operator Manual Echion
Safety
WARNING
Read and understand all of the safety guidelines in this manual.
Refer to Safety on page 21 before operating, doing maintenance on, repairing, and installing
your pump.
CAUTION
Do not tighten a fitting too much. The fitting can fail.
CAUTION
Hydraulic, water, and electrical connections can become loose during shipping and normal
operation. Examine all connections at installation and during regular maintenance.
CAUTION
When replacing wiring, use only the same size, type, and color as the original wiring.
CAUTION
Before assembling high-pressure or hydraulic parts, clean the parts to remove grease and other
contamination.
Clean and examine parts that will be replaced to identify wear patterns or damage that can show
other problems.
Clean each part with a towel and isopropyl alcohol. Examine all parts for deterioration, corrosion,
or damage.
Do not use soap, detergent, or solvents.
Keep the work area clean and dry. Clean fluid spills immediately.
Use a pan or a tray below areas where water or hydraulic fluid can spill during maintenance or
repair procedures.
Obey local protocols for recycling or disposal of parts, materials, and fluids.
National and local environmental rules can apply to disposal.
Refer to Recycling and end of product life on page 96.
Keep accurate maintenance records. Records can help with predicting and preventing
maintenance problems.
Keep spare parts and repair kits available.
To Next Page
Loading...
Need help?
General
