Hypertherm Echion User Manual

Installation
7
Echion Operator Manual 810770 155
Installation
4. Use a 13/16-inch open-ended wrench to install the reducing adapter on the short end of
theL-shaped tubing. Use a torque wrench to tighten the fitting to68N∙m(50lbf∙ft).
5. Use a 5/8-inch open-ended wrench to install your 1/4-inch high-pressure tubing from the
cutting head into the top of the reducing adapter. Use a torque wrench to tighten the fitting
to34 N∙m (25 lbf∙ft).
6. Use two 7/16-inch open-ended wrenches and hardware from the kit to attach the tubing to the
tubing bracket with the clamps.

Hypertherm Echion Specifications

General

Brand	Hypertherm
Model	Echion
Category	Water Pump
Language	English