Symbols and marks
SC-32 810770 Operator Manual Echion
Φ
Number of phases in a power system
HZ
Frequency (hertz)
Type of hydraulic fluid recommended
Hydraulic fluid tank volume (liters)
FLA
Full-load current (amperage)
SCCR
Short-circuit current rating
IMAX
Primary motor maximum current draw (amperes)
KW
Primary motor power output (kilowatts)
L/MIN
Maximum outlet flow rate (liters/minute)
BAR
Maximum outlet water pressure (bar)
KG
Weight (kilograms)
P/N
Electrical enclosure part number
The Conformité Européene (CE) mark affixed to a product signifies the manufacturer’s
declaration of conformity to applicable European directives and standards.
Only those versions of Hypertherm products with a CE mark on or near the data plate
have been tested for compliance with the applicable European directives, such as the
Low Voltage Directive, the Electromagnetic Compatibility Directive, and the Machinery
Directive.
Use caution when operating this equipment.
Refer to the instruction manual. Read and understand all of the safety guidelines in this
manual.
Identifies the terminal of a protective earth (ground) electrode or a terminal intended to
connect to an external conductor for protection against electric shock during a fault
condition
Controls
Remote key switch off
The key switch is in the Local position.
Remote key switch on
The key switch is in the Remote position.
To Next Page
Loading...
Need help?
General
