EasyManuals Logo
Home>Hypertherm>Welding System>HyPerformance HPR130XD

Hypertherm HyPerformance HPR130XD User Manual

Hypertherm HyPerformance HPR130XD
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #262 background imageLoading...
Page #262 background image
12/15/2010
a-4 Hypertherm Plasma systems
Date SAFETY DATA SHEET Revision
6 Dec 2010
Torch Coolant 30% PG Mixture
2.01CLP
7 HANDLING AND STORAGE
Handling Unlikely to cause harmful effects under normal conditions of handling and use.
Storage Keep container tightly closed and dry. Keep away from heat. Keep out of the reach of
children. Keep away from oxidizing agents.
Storage Temperature: Ambient.
Storage Life: Stable at ambient temperatures.
Specific Use: Industrial use only.
8 EXPOSURE CONTROLS/PERSONAL PROTECTION
Respirators Normally no personal respiratory protection is necessary. Wear suitable respiratory
protective equipment if exposure to levels above the occupational exposure limit is likely.
A suitable dust mask or dust respirator with filter type A/P may be appropriate.
Eye Protection Safety spectacles.
Gloves Wearing of chemical protective gloves is not necessary.
Body protection None.
Engineering Controls Ensure adequate ventilation to remove vapors, fumes, dust etc.
Other None.
OCCUPATIONAL EXPOSURE LIMITS
SUBSTANCE CAS No.
LTE L
(8 hr TWA ppm)
LTE L
(8 hr TWA mg/m
3
)
STEL
(ppm)
STEL
(mg/m
3
)
Note:
Propylene Glycol 57-55-6 NE 10* NE NE
AIHA WEEL
in the USA
Benzotriazole 95-14-7 NE NE NE NE None
9 PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Appearance – Liquid Vapor Pressure (mm Hg) Not available
Color – Pinkish – Reddish Vapor Density (Air=1) Not available
Odor – Slight Density (g/ml) 1.0 ± 0.1 g/ml
Odor Threshold (ppm) Not available Solubility (Water) Soluble
pH (Value) 5.5-7.0 (Concentrated) Solubility (Other) Not established
Melting Point (°C) / Freezing Point (°C) < -0°C / (< 32°F) Partition Coefficient (n-Octanol/water) Not available
Boiling point/boiling range (°C): >100°C (>212°F) Auto Ignition Temperature (°C) Not available
Flash Point (°C) >95°C (>203°F) Decomposition Temperature (°C) Not available
Evaporation rate Not available Viscosity (mPa.s) Not available
Flammability (solid, gas) Non-flammable Explosive properties Not explosive
Explosive limit ranges Not available Oxidizing properties Not oxidizing
Other information – None

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hypertherm HyPerformance HPR130XD and is the answer not in the manual?

Hypertherm HyPerformance HPR130XD Specifications

General IconGeneral
BrandHypertherm
ModelHyPerformance HPR130XD
CategoryWelding System
LanguageEnglish

Related product manuals