Hypertherm powermax45 Operator's Manual

TORCH SETUP
3-30 powermax 45 Operator Manual
To remove the torch, press the red button on the connector and pull the connector out of the
receptacle.
Red button
Connect the torch lead
The Powermax45 is equipped with FastConnect
TM
, a quick-disconnect system for connecting and
disconnecting the handheld and machine torches. When connecting or disconnecting a torch, first
turn OFF the system. To connect either torch, push the connector into the receptacle on the front
of the power supply.

Hypertherm powermax45 Specifications

General

Brand	Hypertherm
Model	powermax45
Category	Welding System
Language	English