Hypertherm powermax45 Operator's Manual

9/10
Compliance Information W-1
Attention
Genuine Hypertherm parts are the factory-
recommended replacement parts for your
Hypertherm system. Any damage or injury
caused by the use of other than genuine
Hypertherm parts may not be covered by the
Hypertherm warranty, and will constitute misuse
of the Hypertherm Product.
You are solely responsible for the safe use of
the Product. Hypertherm does not and cannot
make any guarantee or warranty regarding the
safe use of the product in your environment.
General
Hypertherm, Inc. warrants that its Products
shall be free from defects in materials and
workmanship for the specific periods of time
set forth herein and as follows: if Hypertherm
is notified of a defect (i) with respect to the
power supply within a period of two (2) years
from the date of its delivery to you, with the
exception of Powermax brand power supplies,
which shall be within a period of three (3) years
from the date of delivery to you, and (ii) with
respect to the torch and leads within a period
of one (1) year from its date of delivery to you,
and with respect to torch lifter assemblies
within a period of one (1) year from its date of
delivery to you, and with respect to laser heads
within a period of one (1) year from its date of
delivery to you, and with respect to Automation
products one (1) year from its date of delivery
to you, with the exception of the EDGE Pro
CNC and ArcGlide THC, which shall be within
a period of two (2) years from the date of
delivery to you.
This warranty shall not apply to any Powermax
brand power supplies that have been used with
phase converters. In addition, Hypertherm does
not warranty systems that have been damaged
as a result of poor power quality, whether from
phase converters or incoming line power. This
warranty shall not apply to any Product which
has been incorrectly installed, modified, or
otherwise damaged.
Hypertherm provides repair, replacement or
adjustment of the Product as the sole and
exclusive remedy, if and only if the warranty
set forth herein properly is invoked and
applies. Hypertherm, at its sole option, shall
repair, replace, or adjust, free of charge, any
defective Products covered by this warranty
which shall be returned with Hypertherm’s prior
authorization (which shall not be unreasonably
withheld), properly packed, to Hypertherm’s
place of business in Hanover, New Hampshire,
or to an authorized Hypertherm repair facility,
all costs, insurance and freight pre paid by
the customer. Hypertherm shall not be liable
for any repairs, replacement, or adjustments
of Products covered by this warranty, except
those made pursuant to this paragraph and
with Hypertherm’s prior written consent.
The warranty set forth above is exclusive and is
in lieu of all other warranties, express, implied,
statutory, or otherwise with respect to the
Products or as to the results which may be
obtained therefrom, and all implied warranties
or conditions of quality or of merchantability
or fitness for a particular purpose or against
infringement. The foregoing shall constitute the
sole and exclusive remedy for any breach by
Hypertherm of its warranty.
WARRANTY

Hypertherm powermax45 Specifications

General

Brand	Hypertherm
Model	powermax45
Category	Welding System
Language	English