Blade server
cover release
Cover
pins
Blade server
cover
4. Lay the cover flat or store it for future use.
Statement 12
CAUTION:
The following label indicates a hot surface nearby.
Statement 21
CAUTION:
Hazardous energy is present when the blade server is connected to the power
source. Always replace the blade cover before installing the blade server.
Disassembling a scalable blade complex
If the scalable blade complex came preassembled, you must disassemble it to add
components to each of the blade servers in the scalable blade complex.
Note: This procedure assumes that you are disassembling a scalable blade complex
to install components in each of the blade servers but that you will assemble the
blade server back into a scalable blade complex. If you are disassembling the
scalable blade complex to use the blade servers as independent, stand-alone blade
servers, see the Problem Determination and Service Guide.
26 IBM BladeCenter HX5 Type 7873, 7872, 1910, and 1909: Installation and User's Guide
To Next Page
Loading...
Need help?
General