IBM P 615 series User Manual

Table 5. Firmware Error Codes. (continued)
Error Code Description Action/
Possible Failing FRU
2BA0 0000 Service processor POST failure Replace service processor
Location:
U0.1-P1-X1
2BA0 0012 Service processor reports self test failure Replace service processor
Location:
U0.1-P1-X1
2BA0 0013 Service processor reports bad NVRAM CRC Refer to the actions for error code 25A8 0xxx.
2BA0 0017 Service processor reports bad or low battery.
1. Replace the battery, U0.1-P1-X1-V3.
2. Refer to the actions for error code 25A8
0xxx.
2BA0 0021 Open firmware mailbox call to activate attention
LED failed
Call service support.
2BA0 0041 Service processor VPD is corrupted. Replace system backplane
Location:
U0.1-P1-X1
2BA0 0071 VPD data is corrupted for processor 1. Replace the service processor
Location:
U0.1-P1
2BA0 0073 Reserved Reserved
2BA0 0080 Service processor hardware reset request failure
1. Check for system firmware updates. Apply if
available.
2. Call service support.
Chapter 5. Error Code to FRU Index 191

IBM P 615 series Specifications

General

Brand	IBM
Model	P 615 series
Category	Server
Language	English