IBM P 615 series User Manual

Activating and Deactivating FRU LEDs
This task allows you to activate or deactivate a managed system’s system attention LED or any FRU LED.
FRU LEDs are helpful in determining which FRUs need servicing.
To activate or deactivate a managed system’s system attention LED, do the following:
1. In the Navigation area, click the Service Applications icon.
2. In the Navigation area, double-click the Service Focal Point icon.
3. In the Contents area, select Hardware Service Functions. The LED Management window opens.
4. In the LED Management window, select one or more managed systems from the table.
5. Select either Activate LED or Deactivate LED. The associated System Attention LED is then either
turned on or off.
To
activate or deactivate a FRU associated with a particular managed system, do the following:
1. In the Navigation area, click the Service Applications icon.
2. In the Navigation area, double-click the Service Focal Point icon.
3. In the Contents area, click Hardware Service Functions. The LED Management window opens.
4. In the LED Management window, select one managed system from the table.
5. Click the List FRUs... button. The list of FRU slot indexes and their respective current LED states
display.
6. Select one or more FRU slot indexes.
7. Click either the Activate LED or the Deactivate LED button.
The
associated FRU LEDs are now either enabled (blinking) or off.
48 EserverpSeries 615 Service Guide

IBM P 615 series Specifications

General

Brand	IBM
Model	P 615 series
Category	Server
Language	English