IBM P 615 series User Manual

Display Current Settings
This option displays the current setting of the customized boot list. An example of this menu, with one
device in the boot list, follows.
Current Boot Sequence
1. SCSI 18200 MB Harddisk (loc=U0.1-P1/Z1-A8,0)
2. None
3. None
4. None
5. None
-------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
Restore Default Settings
This option restores the boot list to the default boot list. The default boot list will vary depending on the
devices that are installed in the system.
The default boot list is:
1. Primary diskette drive (if installed)
2. CD-ROM drive (if installed)
3. Tape drive (in installed)
4. Hard disk drive (if installed)
5. Network adapter
Multiboot Startup
Multiboot Startup toggles the multiboot startup flag, which controls whether the multiboot menu is invoked
automatically on startup.
Exiting System Management Services
After you have finished using the system management services, type x (for exit) to boot your system.
278 EserverpSeries 615 Service Guide

IBM P 615 series Specifications

General

Brand	IBM
Model	P 615 series
Category	Server
Language	English