Icom GM600 User Manual

54
8
DSC OPERATION
■ Sending a Non-Distress calls (Continued)
D Sending a Position Request call
(Continued)
q When a Position Request call is
received:
• An alarm sounds.
• The following screen is displayed.
w Push any [Close] .
• When the BAM function (p. 20) is
OFF: Push any [Alarm OFF] .
e Push [Accept] .
• Enters the DSC Task mode.
r Push [≈] to scroll the Software Key
functions.
t Select your desired action.
D Sending a Position Request acknowledgment
[ACK Able]:
Sends an acknowledgment with
position and time data.
[ACK Unable]:
Sends an acknowledgment with no
position and time data.
• The call contents screen is displayed.
• Rotate [CH/ENT] to view the call
contents.
• Change your position data, if the
displayed data is invalid. (p. 31)
y Push [Call] to s end the
acknowledgment .
• When [ACK Able] is selected in step
t, your position and time data are
transmitted.
u Push [Home] to r eturn to the
Main screen.
TIP: When “Position ACK” is set
to “Auto (Able),” the transceiver
automatically sends the
acknowledgment. (p. 77)
When a Position Request call is received,
you can send an acknowledgment.
• When the BAM function (p. 20) is
OFF: The backlight blinks and the
popup screen is displayed.
Push any [Alarm OFF]
, and
then push any [Close Call RCVD
Window]
.
When the BAM function is OFF.
• Rotate [CH/ENT] to view the call
contents (position data is included).
o Push [Home] to return to the
Main screen.

Icom GM600 Specifications

General

Brand	Icom
Model	GM600
Category	Transceiver
Language	English