21
4
OTHER FUNCTIONS
■ Weather memory channel
scan (U.S.A. version only)
Scanning searches for weather channel signals automatically
and makes it easier to listen purposes.
Repeatedly scans all weather memory channels.
This function is available for the U.S.A. version only.
q Set to the weather memory channel mode.
w Push and hold [VOL] for 2 sec. to start weather memory
channel scan.
• To change the scan direction, turn [DIAL].
•“NO WTH” appears when no signal receives from WX01– WX10
channels. Then the weather memory channel scan stops auto-
matically.
•“SEARCH“ flashes while scanning.
e Push and hold [VOL] for 2 sec. again to stop the scan.
To Next Page
Loading...
Need help?
General
