29
7
CLONING
D Data cloning
Cloning allows you to quickly and easily transfer the
programmed contents or data from a PC to a transceiver
using the optional CS-A210
CLONING SOFTWARE.
Data can be cloned to and from a PC (IBM compatible) using
the optional CS-A210 CLONING SOFTWARE and the optional OPC-
1529R
CLONING CABLE (connect with the data jack). Consult the
CS-A210 instruction manual and HELP file for details.
D Displayed Message
• While clone writing.
• When clone writing is finished properly.
• When clone writing error occurs.
• While clone reading.
• When turn the power OFF/ON after clone writing error oc-
curs.
(The transceiver boots with Error mode.)
In this case, Clone writing correctly data to the transceiver is
necessary to cancel the error.
To Next Page
Loading...
Need help?
General
