28
4
BIIS OPERATION
4
DD
Received message selection
The transceiver memorizes the received messages for record. Up
to 6 messages for status and SDM, or 95 character SDM’s can be
memorized. The oldest message is erased when the 7th message
is received. However, once the transceiver is powered OFF, all
messages are cleared.
q Push [P1] (Digital) for 1 sec.
• Displays queue memory.
w Push [P1] (Digital) momentarily.
• Displays message memory.
When a message is available
When no message is available
e Push [ ]/[ ] to select the desired message.
• When selecting the SDM that includes more than 8 characters, the
message scrolls automatically, when the automatic scroll function is
activated.
• Push [Status Up]/[Status Down] to scroll the message manually.
r Push [P1] (Digital) for 1 sec. again to return to the standby con-
dition.
• When no operation is performed for 30 sec., the transceiver returns
to the standby condition automatically.
IC-F50_F60_MDC-2.qxd 06.11.17 4:39 PM Page 28 (1,1)
To Next Page
Loading...
Need help?
General
