3-2-2 Cloning Items
Common Setting
Common SettingCommon Setting
Common Setting
Key & Display
Key & DisplayKey & Display
Key & Display
Set Prio A, Prio A (Rewrite), Disp Select, Lock,
High/Low, etc. for the programmable key assign, and
set Opening text, RF Power Selection, MR/Code
Display (PMR) and Beep condition for the display
assign.
Common
CommonCommon
Common
Commonly set items such as Clone Comment (1)/(2),
User Password, PWR ON Password in the Common 1
screen, Auto Reset Timer A/B, Scrambler Type, Group
Code in the Common 2 screen, RPT TOT Timer, Penalty
Timer, Hang ON Timer in the Common 3 screen.
Expert
ExpertExpert
Expert
Expertly set item such as TX/RX inverse, the Low/High
beep tone frequencies in the Expert 1 screen, REG
Unit TEMP, PA Unit TEMP, TEL Code, TEL Code Times,
Backup condition in the Export 2 screen.
Memory CH
Memory CHMemory CH
Memory CH
The 'Memory CH' window allow you to edit the channel
information. Editable items such as RX/TX Frequency,
Text, RX/TX C.Tone, BASE/RPT TOT, Hang ON,
2Tone
2Tone2Tone
2Tone
RX Code CH
RX Code CHRX Code CH
RX Code CH
Set 1st/2nd tone frequencies, Group Call, text, ANS,
Beep, Auto TX and Stun.
RX Code Setting
RX Code SettingRX Code Setting
RX Code Setting
Set Notone Timer, Group Timer and Auto TX Timer.
TX Code
TX CodeTX Code
TX Code
Set Code type, 1st/2nd tone Frequency and Period.
5Tone
5Tone5Tone
5Tone
RX Code CH
RX Code CHRX Code CH
RX Code CH
Set RX Code, text, ABC, Aud Mode, Emer, Beep, ext.
RX Code Setting
RX Code SettingRX Code Setting
RX Code Setting
Set Link A Timer, Compare Digit, ID Decode Timer and
Auto Timer.
TX Code CH
TX Code CHTX Code CH
TX Code CH
Set TX Code, Text, Input Digit, Update, ABC condition,
and Sel.
TX Code Setting
TX Code SettingTX Code Setting
TX Code Setting
Set Long Tone Timer, Link R/1/2 Timer, Lead Out
Delay Timer, ABC Decode Timer, etc.
Format
FormatFormat
Format
Set the Tone Period for a tone encoder, Notone Timer
Cloning items
Cloning itemsCloning items
Cloning items
30
Text, RX/TX C.Tone, BASE/RPT TOT, Hang ON,
Wide/Narrow, RPT/BASE, RF PWR, Lockout, Auto Reset,
BASE/RPT Log, Scrambler OFF/ON/Inhibit, Scrambler
Code.
Multiple Tone
Multiple ToneMultiple Tone
Multiple Tone
Set a continuous tone frequency for RX or TX mode or
check the Simplex's check-box to use the same tone
frequency as TX mode to RX mode.
DTMF
DTMFDTMF
DTMF
RX Code CH
RX Code CHRX Code CH
RX Code CH
Program DTMF code of up to 24 digits, Text, LCD Blink,
Beep, SP Mute and Code MR conditions.
TX Code CH (Autodial)
TX Code CH (Autodial)TX Code CH (Autodial)
TX Code CH (Autodial)
Program DTMF code of up to 24 digits.
RX System Code
RX System CodeRX System Code
RX System Code
Program DTMF code of 4 digits in the System
Password, System Control Exit, Repeat Start/Stop, TX
Start/Stop, etc.
TX System Code
TX System CodeTX System Code
TX System Code
Program DTMF code for response of 4 digits in the
System Password OK ACK, System control Exit ACK, OK
ACK, and NG ACK.
DTMF Setting
DTMF SettingDTMF Setting
DTMF Setting
Set DTMF Timer, 1st Timer, Header Tone, De-limiter
Tone, etc.
Set the Tone Period for a tone encoder, Notone Timer
and Tone Length.
User Tone
User ToneUser Tone
User Tone
set the encode tone frequency, the lower and higher
edge of the tone decode frequency range. And check
the 'Auto' check-box to recommended decode
frequencies are automatically set.
NOTE:
NOTE: NOTE:
NOTE: The above instructions are for reference only.
Please refer to the HELP file of the cloning software
for the function or setting details.
To Next Page
Loading...
Need help?
General
