3-6 Remote Control Function
3-6-1 Remote Control Setting
1
1
1
1-
--
-1 REMOTE CONTROL SETTING
1 REMOTE CONTROL SETTING1 REMOTE CONTROL SETTING
1 REMOTE CONTROL SETTING
System control
System controlSystem control
System control
To enable remote control functions, the DTMF settings (RX System Code, TX System Code, DTMF Setting, TX Code
CH (Autodial), etc.) must be pre-programmed using CS-FR3000 cloning software. Use CS-FR3000 help screens for
description of functions and operation and for programming details.
▒ NOTE
NOTENOTE
NOTE: Check the “Control” check-box to enable remote control operation using DTMF signals
Phone Line to Repeater Connection
Phone Line to Repeater ConnectionPhone Line to Repeater Connection
Phone Line to Repeater Connection
IC-FR4000
Public Telephone Line
Phone Line to Repeater Connection for Remote Control Function
Phone Line to Repeater Connection for Remote Control Function Phone Line to Repeater Connection for Remote Control Function
Phone Line to Repeater Connection for Remote Control Function
34
▒ NOTE:
NOTE: NOTE:
NOTE: Check the “TEL Function” check-box to enable remote control operation using DTMF signals from the
▒ telephone line.
To Next Page
Loading...
Need help?
General
