Icom ID-51A Basic Instructions

29
3
MENU SCREEN
New2001 New2001
Rainfall
Selects the units to display the rainfall.
WindSpeed
Selects the units to display the wind speed.
Display Language
Selects the display language in the DR screen or Menu
mode. When “English” is selected in System Language,
this setting will disappear.
SystemLanguage
Selects English or Japanese as the system language of
the transceiver.
Sounds
Sets the Sound options.
VolumeSelect
Selects to adjust the audio output level of all bands togeth-
er, all separately, or just the BC Radio separately.
BCRadioLevel
Sets the initial audio output level difference between the
BC Radio and the A and B bands when “All” is set in “Vol-
ume Select.”
EarphoneMode
Turns the Earphone mode ON or OFF.
BeepLevel
Sets the beep output level.
Beep/VolLevelLink
Selects whether or not the beep output level can be ad-
justedbythe[VOL]control.
Key-TouchBeep
Turns the confirmation beep tones when key is pushed,
ON or OFF.
HomeCHBeep
Turns the Home CH Beep ON or OFF.
BandEdgeBeep
Turns the Band edge beep ON or OFF.
ScanStopBeep
Turns the scan stop beep ON or OFF.
StandbyBeep
Turns the standby beep function in the DV mode ON or
OFF.
SubBandMute
Selects to mute the SUB band audio signal while receiving
on the MAIN band, and/or sound a beep when a signal
disappears on the SUB band.
ScopeAFOutput
Selects the audio output option during a sweep.
TimeSet
Sets the Time options.
Date/Time
Sets the current date and time.
GPSTimeCorrect
Sets to automatically correct the time using a GPS signal.
UTCOffset
Enters the time difference between UTC and the local
time.
Menu items and their details ■
Root item “Display” (Continued)

Icom ID-51A Specifications

General

Brand	Icom
Model	ID-51A
Category	Transceiver
Language	English