New2001
79
8
GPS OPERATION
New2001
■ GPSLoggerfunction
The GPS Logger function allows you to store the GPS po-
sition data (Latitude, Longitude, Altitude, Positioning state,
Course, Speed and Date) onto a microSD card, as a route.
If you use this function while driving, you can check your driv-
ing course on a mapping software. (Default setting is ON.)
NOTE: The GPS logger function requires a microSD card
installation.
•Seepage10formoredetails.
e Push D-pad() to select
“OFF.”
Push[MENU] r
to exit the
Menu screen.
•TheGPSLoggercancels.
NOTE:
•
This function is ON as the default setting, if you install a
microSD card, the transceiver continuously stores the po-
sition data from the GPS receiver, even if the transceiver
is rebooted. To cancel this function, turn the function OFF.
While this function is ON, and when the transceiver is
turned OFF, the log file will be closed. Then the trans-
ceiver is turned ON and positioning is carried out by the
GPS receiver, a new log file will be created.
•WhenthemicroSDcardisfull,thisfunctionwillautomati-
cally pause.
<Aboutlogle>
You can display your route as you move, if you import the log
file into a mapping software.
•Youcanseeyourrouteonthesoftwaremap.Thelesmaynotbe
compatible with all mapping software.
•SeethePDFtypeAdvancedInstructionsforcopyingthelogleto
your PC.
TurningOFFtheGPSLoggerfunction
If you do not use this function,
turn OFF the function as follow-
ing procedures.
q Push [MENU]
to enter
the Menu screen.
Push D-pad( w ) to select
“GPS Logger,” and then push
D-pad(Ent).
( GPS > GPS Logger >
GPSLogger)
•Iftheitemisnotdisplayed,push
D-pad() one or more times to
select the page.
To Next Page
Loading...
Need help?
General
