or down. Push the stalk back down, to the desired setting or o
position, from a higher position.
SPEED DESCRIPTION
OFF
This is the bottom resting position for the
selector. The front wipers are o.
SPEED DESCRIPTION
QUICK WIPE
From the o position,
when the stalk is
temporarily pushed down, the wipers will
perform a single sweep. The stalk will return
to the o position as soon as it is released.
INTERMITTENT
Pushing the stalk one click up from the o
position will turn on the wipers to sweep
intermittently. The speed is controlled by the
rotary selector (1). Twisting away from the
driver increases the wiper speed; toward the
driver will decrease the wiper speed.
LOW SPEED
Pushing the stalk two clicks up from the o
position will put the wipers on a low speed,
continuous sweep.
HIGH SPEED
Pushing the stalk three clicks up from the o
position will put the wipers on a low speed,
continuous sweep.
To protect the wiper arms when washing your Grenadier, either
leave your Grenadier o or
set the ignition to on and the wipers to
o. This will keep the wiper arms locked into the park position and
will help prevent damage.
Windshield Washers
The wash and wipe are controlled by pushing the stalk away from,
or pulling toward, the driver. Pushing the stalk away from the
OVERVIEW
46
To Next Page
Loading...
Need help?
General