EN
Programming
Switch-off commands have priority over switch-on commands.
INFORMATION RELATING TO PROGRAM CREATION
The device is programmed in the following steps:
• Setting up data and/or date ranges
You can specify on which day and/or at what time of day (date from ... to) that the device is turned on
or off in this menu.
• Setting the function and switching time
Under this menu item, you specify which switching command is performed at which time (ON, OFF,
pulse*, cycle*, random*). This can be specied per channel for different date ranges or as date inde
-
pendent.
* These functions depend on the variant.
51
To Next Page
Loading...
Need help?
General
