Detailed Function Description
94
Function
Code
Name Description Setting Range
Factory
Setting
PA.26 Multi-step speed 12 -100.0~100.0% -100.0~100.0 0.0%
PA.27 12
th
Step running time 0.0~6553.5s(h) 0.0~6553.5 0.0s
PA.28 Multi-step speed 13 -100.0~100.0% -100.0~100.0 0.0%
PA.29 13
th
Step running time 0.0~6553.5s(h) 0.0~6553.5 0.0s
PA.30 Multi-step speed 14 -100.0~100.0% -100.0~100.0 0.0%
PA.31 14
th
Step running time 0.0~6553.5s(h) 0.0~6553.5 0.0s
PA.32 Multi-step speed 15 -100.0~100.0% -100.0~100.0 0.0%
PA.33 15
th
Step running time 0.0~6553.5s(h) 0.0~6553.5 0.0s
Notice:
z 100% of multi-step speed x corresponds to the maximum frequency (P0.07).
z If the value of multi-step speed x is negative, the direction of this step will be
reverse, otherwise it will be forward.
z The unit of x step running time is determined by PA.36.
Selection of step is determined by combination of multi-step terminals. Please refer to
following figure and table.
Figure 6.34 Multi-steps speed operation diagram.
To Next Page
Loading...
Need help?
General