INVT CHV Series User Manual

Operation
35
Button Name Description
Run Key Start to run the inverter in keypad control mode.
STOP/RESET
Key
In running status, restricted by P7.04, can be used to
stop the inverter.
When fault alarm, can be used to reset the inverter
without any restriction.
Shortcut Key
Determined by Function Code P7.03:
0: Jog operation
1: Switch between forward and reverse
2: Clear the UP/DOWN settings.
3: Quick debugging mode1 (by menu)
4: Quick debugging mode2 (by latest order)
5: Quick debugging mode3 (by non-factory setting
parameters)
+
Combination
Key
Pressing the RUN and STOP/REST at the same time
can achieve inverter coast to stop.
5.1.3 Indicator light description
5.1.3.1 Function Indicator Light Description
Function indicator Description
RUN/TUNE
Extinguished: stop status
Flickering: parameter autotuning status
Light on: operating status
FWD/REV
Extinguished: forward operation
Light on: reverse operation.
LOCAL/REMOT
Extinguished: keypad control
Flickering: terminal control
Light on: communication control
TRIP
Extinguished: normal operation status
Flickering: overload pre-warning status
5.1.3.2 Unit Indicator Light Description
Unit indicator Description
Hz Frequency unit
A Current unit
V Voltage unit
RPM Rotating speed unit
% Percentage

INVT CHV Series Specifications

General

Brand	INVT
Model	CHV Series
Category	DC Drives
Language	English