ITech IT-M3131D User Manual

Functions and Features
No. Parameter Default Value
3 OVP Mode Off
4 OVP Level MAX
5
OVP Delay
10.00 S
6 OCP Mode Off
7 OCP Level MAX
8
OCP Dealy
10.00 S
9 OPP Mode Off
10 OPP Level MAX
11
OPP Delay
10.00 S
4.2.6 View the System Information
This menu item is used to view the system information of the instrument.
The procedures to view the system information are as follows.
1. Press [Shift]+[Display] (System) to enter into the system menu interface.
2. Use left and right keys or rotate the knob to select System Info and press
[Enter] key to make the parameter in modification.
The user can use left and right keys or knob to view the following system
information.
System
Info
View the system information.
Model
Display the instrument model.
Version Instrument version information.
Main
Display the main firmware version.
Comm
Display the communication board version.
Sub1
Display the version of the control board for
channel 1.
Sub2
Display the version of the control board for
channel 2.
SN Display the serial number.
Copyright © Itech Electronic Co., Ltd.
52

ITech IT-M3131D Specifications

General

Brand	ITech
Model	IT-M3131D
Category	Power Supply
Language	English