To Next Page

To Previous Page

Functions and Features

4.7.4 Run List Program

The user can run the existed list program as needed to enable outputting of cor-

responding waveform sequence by the power supply. Detailed operation steps

are as below:

1. Press [Shift]+[I-set] (Function) to enter function menu interface.

2. Use left and right keys or rotate the knob to select List and press [Enter]

key to enter the set interface of list mode.

3. Select the desired list program.

• Method 1: Select Recall List and press [Enter] key. Use knob to select

the desired list program and press [Enter] key to confirm.

• Method 2: To simplify the operation, you can directly run the list program

after editing it in the Edit List menu item. Skip the step in the Recall List

menu item.

4. Select Run List and press [Enter] key to confirm.

5. Use the knob to set Run List to On and press [Enter] key to confirm.

6. Press [On/Off] key to turn the output on.

7. Based on the trigger method, perform the trigger operation. When the trigger

signal is received, the power supply outputs the waveform sequences.

Stop running: During the running of List, you can press [Shift]+[I-set] (Func-

tion) to enter the Function menu and set the Run List as Off to stop running.

Otherwise, the List waveform cannot be edited while the List is running.

4.8 External Analog Function (Option)

This menu item is used to control the external analog function to enable or dis-

able. The external analog interface is not the standard-equipped interface for

the power supply.

This series power supply provides a optional DB–25 analog interface(IT-

E1208). The analog interface provides the following capability:

• Remote control of output voltage and current

• Remote control of output On/Off state

• Remote monitoring of output voltage/current measurement and CC/CV

mode

• Remote monitoring of output On/Off state, load status and fault status

• Clear the instrument malfunction

• RS-485 communication interface, please refer to 2.7.6 RS-485 Interface for

detailed description about the interface

ITech IT-M3131D User Manual

Questions and Answers: