en 22
3 SPECIFICATIONS
3.8 CUTTING PERFORMANCE _____________________________________________
3.9 RECOMMENDED LUBRICANTS_________________________________________
Engine oil:
Diesel:Should be to A.P.I. CK-4 or CAT
® ECF-3 Classification CD grades. [10W-30]
Grease: For rear axle: K NATE (RJL No. 4213860), or equivalent to MIL-G-23549C, MIL-G-2345C,
DIN 51 825, DIN 51 818.
General: Lithium based general purpose grease.
3.10 ACCESSORIES ______________________________________________________
Orange Touch-up Paint (12 oz. spray) ..................554598
Rear Roller Cleaner ................................................62820
Turf Groomer 1/4” Spacing......................................67912
Turf Groomer 1/2” Spacing......................................67914
High Cut Roller Kit...................................................68634
Motor Adapter Kit ..................................................894991
Magknife Kit
22 in. Medium Section Magknife Kit....................4266571
22 in. Tournament Magknife Kit...........................4266551
22 in. Super Tournament Magknife Kit ................4266570
Solid Rollers
22 in. with Scraper (Light) .......................................68530
22 in. with Scraper ..................................................68641
22 in. Solid Tube Rear Roller ..............................1004990
Grooved Rollers
22 in. Assembled Disc.............................................68527
22 in. Machined Aluminum ......................................68614
22 in. Machined Steel............................................. 68613
22 in. Segmented Roller 68673
Frequency of Cut
@ 2200rpm reel speed
Clip rate
@ 2200rpm reel speed
Blades mm/kph inches/mph
Cuts/metre
@ 6.04 kph
Cuts/yard
@ 3.74mph
7 1.247 0.079 41 37
8 0.963 0.061 52 48
11 0.789 0.050 64 59
15 0.584 0.037 87 80
TEMPERATURE VISCOSITY
Above 4°C (39°F) SAE30
Below 4°C (39°F) SAE5W-30 or SAE10W-30
To Next Page
Loading...
Need help?
General
