en 56
7 MAINTENANCE
7.8 OIL COOLER AND RADIATOR __________________________________________
1. Release the 6 Swell latches (D) holding the radiator
/ oil cooler mesh cover (E) to the cowling.
2. Remove screen and clean.
3. Remove any debris from inside of cowling and around
oil cooler and radiator F.
4. Replace screen, secure with swell latches.
7.9 PRIME THE FUEL SYSTEM _____________________________________________
Use the following procedure to prime the fuel system:
If air enters the fuel system, the air must be purged from the fuel system before the engine can be started. Air can
enter the fuel system when the following events occur:
• The fuel tank is empty or the fuel system has been partially drained.
• The low-pressure fuel lines are disconnected.
• A leak exists in the low-pressure fuel system.
• The fuel filter is replaced.
NOTICE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance,
testing, adjusting and repair of the product.
Be prepared to collect the with suitable containers before opening any compartment or disassembling
any component containing fluids.
CAUTION
Contact with diesel fuel can damage your skin. Use gloves when working with diesel fuel.
If you come in contact with diesel fuel, wash it off immediately.
Dispose of used diesel fuel in accordance with local regulations.
!
To Next Page
Loading...
Need help?
General
