B
en 39
OPERATION 6
6.4 SETTING UP THE MACHINE ______________________________________________
Check the hydraulic system. Make sure the connections are tight and all hoses and lines are in good condition
before pressurizing the system. Hydraulic system should be allowed to warm-up and re-check connections
for leaks.
WARNING
Setup procedures must be performed as specified by properly trained service personnel only.
WARNING
If a leak is suspected, use a piece of cardboard or wood, NOT your hand, to check for leaks.
Hydraulic fluid escaping under pressure can penetrate skin and do serious damage.
Immediate medical assistance must be sought.
Serious infection or reaction can develop if proper medical treatment is not administered immediately.
NOTICE
Any reference to the right, left, front, or rear of the unit will always be determined from
the operators seated position.
!
!
To Next Page
Loading...
Need help?
General
