Long Knife - used to give extended reach for normally
inaccessible areas.
JCB part number - 892/00844
Braided Cutting Wire - consumable heavy duty cut-out
wire used with the glass extraction tool (above).
JCB part number - 892/00849
(approx 25 m length)
S186330
4 - 3
Section 1 General Information
9803/3280
Section 1
4 - 3
Issue 1
Service Tools (cont'd)
Section B - Body & Framework
S186360
Slide Hammer Kit - 993/68100
1 :993/68101 Slide Hammer 6 :993/68106 Adaptor - M20 x M24
2 :993/68102 End Stops 7 :993/68107 Bar - M20 x M20 X 800MM
3 :993/68103 Adaptor - M20 x 5/8" UNF 8 :993/68108 Adaptor - M20 x 7/8" UNF
4 :993/68104 Adaptor - M20 x 1" UNF 9 :993/68109 Adaptor - M20 x M12
5 :993/68105 Adaptor - M20 x M20 10 :993/68110 Adaptor - M20 x 5/8" UNF (Shoulder)
11 :993/68111 Adaptor - M20 x 1/2" UNF
Nylon Spatula -
general tool used for
smoothing sealants - also
used to re-install glass in
rubber glazing because metal tools
will chip the glass edge.
JCB part number - 892/00847
S186470
Rubber Spacer Blocks - used to provide the correct
set clearance between glass edge
and cab frame.
JCB part number - 926/15500
(unit quantity = 500 off)
S186550
S196910
1
2
2
2
3
5
7
8
6
4
9
11
10
To Next Page
Loading...
Need help?
General
