41
A
(2) How to use the communication function
This sewing machine is capable of inputting/outputting data by means of an USB thumb drive.
Name of data Extension Description of data
Vector form data
VD00 XXX .VDT
(XXX:001 to 999)
Data on needle entry points created with the PM-
1. The data form is commonly used among JUKI
sewing machine.
(
User pattern
)
3) Selecting the communication direction
Press ITEM SELECT key
to display pic-
tograph
A
which shows the communication direc-
tion selection.
Press DATA CHANGE key
to select the
communication direction.
: Data shown on the operation panel is
written on the USB thumb drive.
: Data stored on the USB thumb drive is
read into the operation panel.
4) Selecting the number
Press ITEM SELECT key
to select file
No.
B
to be read.
Press DATA CHANGE key
to select
file No.
C
to be written. Press set READY key
to write the data in le No.
C
.
1) Entering the communication mode.
Press MODE key
to display the mode
screen. Put the pattern copy in the selected state
with ITEM SELECT key
. Then, press
EDIT key
.
2) Selecting the type of communication.
Press DATA CHANGE key
to select
the type of communication.
B C
To Next Page
Loading...
Need help?
General
