JUKI LK-1941 User Manual

−89 −
Standard Adjustment
3) How to use the tension controller No. 3
① Confirmation of the memory switch
② Creation of the pattern
™ To drive the tension controller No. 3, it is required to input an inverting point in the stitching pattern.
＊ For inputting the inverting point, input device PGM-7 or PGM-20 which is separately available is required.
In addition, when using PGM-20, the ROM writer is required.
＊ Disk of tension controller No. 3 always rises at the sewing start and sewing end, and there is no limit of
number of inverting points.
Inverting point
Drive section of tension
controller No. 3
(Tension is applied after
thread tension disk is closed.)
Inverting point
Sewing start
Inverting point
Inverting point
Drive section of tension
controller No. 3
(Tension is applied after
thread tension disk is
closed.)
Thread
trimming

JUKI LK-1941 Specifications

General

Brand	JUKI
Model	LK-1941
Category	Sewing Machine
Language	English