– 19 –
Functions
Function No.58
Needle bar normal position
retaining function
Needle bar vertical normal position retaining function
0 : Needle bar normal position retaining function disabled
1 : Needle bar normal position retaining force – weak
2 : Needle bar normal position retaining force – medium
3 : Needle bar normal position retaining force – strong
[How to make the setting]
12. HOW TO COPE WITH THE NEEDLE BAR DOWN WHEN THE MA-
CHINE MAKES A DOWN POSITION STOP
If the needle bar lowers when the machine made a down position stop, make the settings of the following
functions.
1) Refer to "1. Setting of the mounted head, 1) How to enter into the function setting mode”, and enter into
the function setting mode.
2) Press
switch
or switch
to call out function setting No. 58.
3) Press
switch
or switch
and select the function.
4) Press
switch
or switch
and return to the function setting mode.
To Next Page
Loading...
Need help?
General
