Flashing sequence / charging curve assignment (ELG 2430)
Flashing sequence Selected charging curves (characteristics)
0 Truck without battery
1
Wet cell battery: PzS with 100 - 300 Ah
Wet cell battery: PzM with 100 - 179 Ah
2 Maintenance-free: PzV with 100 - 149 Ah
3 Maintenance-free: PzV with 150 - 199 Ah
4 Maintenance-free: PzV with 200 - 330 Ah
5
Wet cell battery: PzS with pulse characteristic 200 -
400 Ah
Wet cell battery: PzM with pulse characteristic 180 -
400 Ah
Wet cell battery: PzS with pulse characteristic 200 -
414 Ah
6 Jungheinrich 100 - 300 Ah
NOTICE
u
All other switch positions (48) block the charger, and the battery is not charged.
u
For PzM batteries with a capacity of less than 180 Ah set characteristic 1, beyond
180 Ah set characteristic 5.
u
With PzS 200-300 Ah wet cell batteries both characteristic curves 1 and 5 can be
used. Characteristic 5 achieves a faster charge.
u
When the battery is connected this allows you to adjust via the charger: If the
switch position is valid the green LED flashes according to the position set; if the
switch position is invalid the red LED flashes.
52
04.19 en-GB
To Next Page
Loading...
Need help?
General
